DIAMOND WALL SAW -EURODIMA -AUSTRIA-WS 20E
Description
The new wall saw impresses users with maximum performance and low weight. The long service life of the tool and the world's longest wall saw service interval will also make it a very economical choice. The structurally identical feed and rotation motors, equipped with a wear-free electromagnetic brake, also contribute to cost-effectiveness.
The WS20 wall saw is available in two rail systems, as the WS20E for the EURODIMA rail system and as the WS20H for the H version rail system.
/ Wall saw head: only 29 kg
/ Motor with 20 kW ServoPower, comfortable 12 kg and water cooling - no additional cooling required
/ Tool-free motor locking with hand lever
/ Power transmission from the engine via a damped wear-resistant claw coupling
/ Autonomous drainage of cooling water from engine and saw - prevention of frost damage
/ Tool-less electromagnetic brake
/ Tool-free quick-attachment of blade guard
/ Long service interval after 250 operating hours
/ Feeder motor and swivel motor are identical in design - easy to replace
/ Feeder and rotation motor are protected against overload by a friction clutch
/ Simultaneous control of feeding and rotation possible
/ Improved roller system thanks to axial and radial bearings
/ Flat flange can be mounted and dismounted from the motor side - radial blade flange holder
/ Simultaneous control of feed and rotation possible
/ Improved roller system thanks to axial and radial bearings
/ Flat flange can be mounted and dismounted from the motor side - radial disc flange holder
/ Free lifting of saw blade Ø 825 mm
/ Blade diameter up to Ø 1600 mm, thus max. cutting depth 725 mm
/ Standard equipped with radio remote control
/ Air-cooled control box
/ No additional flat flange is required for versions E and H
/ Hardened roller guide
/ 16 A operation also possible
/ Automatic control of feed and lowering speed
Purchase information
Contents of the package
The new wall saw impresses users with maximum performance and low weight. The tool's long service life and the world's longest service interval among wall saws make it a very economical choice. The structurally identical feed and pivot motors, equipped with a non-wearing electromagnetic brake, also contribute to cost-effectiveness.
The WS20 wall saw is available with two rail systems: WS20E for the EURODIMA rail system and WS20H for the H version rail system.
/ Wall saw head: only 29 kg
/ 20 kW ServoPower motor, comfortable 12 kg and water cooling - no additional cooling required
/ Tool-free motor locking with hand lever
/ Power transmission from the engine via a wear-resistant, damped claw coupling
/ Autonomous drainage of cooling water from engine and saw - prevention of frost damage
/ Wear-resistant electromagnetic brake
/ Tool-free quick-attachment of saw blade guard
/ Long service interval after 250 operating hours
/ Feeder and swivel motors are structurally identical - easy replacement
/ Feeder and rotation motors are protected against overload by a friction clutch
/ Possibility of simultaneous control of feeding and rotation
/ Improved roller system thanks to axial and radial bearings
/ Flat flange mountable and removable from the engine side - radial blade flange holder
/ Free stroke cutting disc Ø 825 mm
/ Blade diameter up to Ø 1600 mm
Maximum cutting depth 725 mm
/ Standard equipped with radio remote control
/ Air-cooled control box
/ E and H versions do not require an additional flat flange
/ Hardened roller guide
/ 16 A operation also possible
/ Automatic feed and lowering speed control
===============================================
Radio remote control
Part number: 6SEZB04
/ High interference protection
/ Modern design, non-slip handle
/ Frequency management to prevent HF interference
/ Innovative control
/ Possibility of simultaneous feeding and lowering
/ Range approx. 15 m, more depending on ambient conditions
/ Receiver mounted directly into the PowerCube or PowerUnit, meaning no additional installations are required and optimum protection is guaranteed.
/ SCOPE OF SUPPLY
1 transmitter, 1 receiver, 1 dual charger, 2 batteries, instruction manual, belly strap, car charging adapter
/ TRANSMITTER SPECIFICATIONS
Production type: Pressure IP65/NEMA4
Compensation valve: Goretex film
Frequency band: Multi-band (400-930 MHz)
Battery life: 16 hours
Temperature range: -20°C + 70°C
Weight with battery: 950 g
/ RECEIVER SPECIFICATIONS
Temperature range: -20°C + 70°C
Weight with battery: 300 g
Dimensions: 117 x 133 x 36 mm
===========================================
Max. speed at the saw blade 1,140 rpm
Max. blade diameter 1,600 mm
Max. cutting depth 725 mm
Feed and swivel force 300 kg
Lowering - longitudinal feed 0 - 3 m/min
Max. speed of the swivel arm 0-2 rpm
Weight - wall saw motor 12.0 kg
Weight - saw head without motor 29 kg
Saw blade bore 60 mm - other on request
Saw blade flange for flush cut WS20E - TK 110 - 6xM8, TK 130 - 6 x M8
WS20H - TK 110 - 6 x M10, TK 130 - 6 x M8
Machine dept 424.5 mm
Machine width for horizontal swivel arm 430 mm
Machine width 380 mm
===============================================================================================
rail lengths - to be selected
Length 0.30 m - 6SBZB031
Length 0.60 m - 6SBZB066
Length 1,30 m - 6SBZB131
Length 1.96 m - 6SBZB196
Length 2.30 m - 6SBZB231
==============================================
Quantity per pack
1Net price
188,000.00 PLN / € 44,761.90Photo gallery
Features and characteristics
Related products
Technical data
DIAMOND WALL SAW -EURODIMA -AUSTRIA-WS 20E
/ TECHNICAL DATA WS20E / WS20H
Power output at blade 20 kW
Max. blade speed 1140 rpm
Max. blade diameter 1600 mm
Max. cutting depth 725 mm
Feed and rotation force 300 kg
Lowering - longitudinal feed 0 - 3 m/min
Max. speed of the rotary arm 0-2 rpm
Weight - wall saw motor 12.0 kg
Weight - saw head without motor 29 kg
Blade opening 60 mm - others on request
Flush cut saw blade flange WS20E - TK 110 - 6 x M8, TK 130 - 6 x M8
WS20H - TK 110 - 6 x M10, TK 130 - 6 x M8
Machine depth 424.5 mm
Machine width for horizontal swivel arm 430 mm
Machine width 380 mm